提高泡沫穩定性的發明方法
使用機械分散機(Dispermat)混合疏水蛋白，SDS和纖維。分散機速度可調，但通常在實驗中使用約3800rpm。研究泡沫體積隨時間的變化。通過此設置，發泡在1分鐘內達到最大水平。通過攝影監測泡沫體積的變化，其中每10秒拍攝照片。從照片圖像中，確定達到50%氣體體積(t50)和66%氣體體積(t66)所需的混合時間。此外，測定達到的最大體積(Omax)。記錄10分鐘測量泡沫的塌陷率，而每1分鐘拍攝照片。根據這些數據，可以估算泡沫的V /。 V /值描述當液體體積達到其初始高度的一半(排水量)時停止混合后經過的時間。
A METHOD FOR INCREASING FOAM STABILITY FIELD OF THE INVENTION
Mechanical mixer (Dispermat) was used to mix hydrophobin, SDS and fibers. Mixer speed was adjustable, but generally about 3800 rpm used in the experiments. Foam volume was studied as a function of time. Foaming reached the maximum level within 1 min with this set-up. The change of foam volume was monitored by photography,where pictures were taken every 10 s. From the photographic images, the mixing times required for reaching 50% gas volume (t50) and 66% gas volume (t66) were determined. In addition, the maximal volume achieved (Omax) was determined.Collapse rate of foam was measured with 10 min recording, whereas pictures were taken every 1 min. From these data V/ for the foam can be estimated. The V/ value describes the time elapsed after cessation of mixing when liquid volume reaches half of its initial height (drainage volume).
